Rain water harvesting !

Rooftop rain water harvesting structure is a unique system .

This system will be allowed to enter into filter media of water harvesting structure.

The clear water /filtered rain water is allowed to occupy or fill the bottom chamber.

Bottom chambers bottom surface is made with porous concrete (porous concrete means concrete without sand that means metal+Concrete+water)

Below are the three ways of harvesting with single structure.

A.The filtered rain water from bottom chamber is allowed to enter into ground through porous concrete surface for recharging.

B.To enter into our existing bore well through PVC pipe which is fixed from chamber bottom to bore well for fast and heavy recharging.

C.To enter into our existing sump for collection and storage through fixing PVC pipe from chamber bottom to sump.

First of All Plot your House Model and Observe the Pipeline attached to the Roof.

That either it is Connected to the Drainage or not.

If the Roof Pipeline is connected to the drainage , remove the pipeline from that drainage and tie the Cotton Cloth to the end of the Pipeline and arrange the Drum or Bucket to collect the Rain Water Easily.

 You Can also Watch the Similar Video in  English